2 XM
2 X 1500W Class H Amplifier
Product at a Glance
The 2 XM is a reliable dual-channel Class-H amplifier delivering 1800W per channel at 2Ω and up to 3600W bridged at 4Ω, tailored for small to mid-sized PA systems, floor monitors, and distributed audio setups requiring tight low-end control and clean headroom. It offers a wide frequency response from 20Hz to 20kHz with low total harmonic distortion (<0.03% at 1kHz) and a 36 dB system gain for smooth, punchy audio reproduction. Equipped with PSL preamps and Gorilla Limiters, the amplifier ensures sonic consistency and protection in demanding live sound environments. Designed for flexibility and ease of use, it features rotary volume knobs, input sensitivity toggle switches, and network-ready LED indicators for quick diagnostics. Connectivity options include XLR inputs, speak-on, binding post connectors, and high-current outputs. Housed in a compact 2U black aluminum chassis with a matte star white front panel, the 2 XM fits seamlessly into any rack and includes advanced thermal, inrush, and short-circuit protections, making it a robust, portable choice for venues, rentals, and mobile systems.
CRAFTSMANSHIP
Painstakingly Perfect Production
Over the years, craftsmanship has been closely linked with small scale individualistic production. Back in 1972, we started the same way. As we grew in scale & size, it was difficult to build each speaker individually, but quality control was of utmost importance as so switching to a general assembly line was simply not an option. So we wrote up a code, one quite like enigma, to ensure quality control. We selected the right partners, got the right tools, and in cases where those weren't available, we invented them. We grew slower than most as our aim was to last longer than most.
TECHNICAL SPECIFICATIONS
OUTPUT POWER
• 2 Output Channels
• 900W/ Ch @ 8Ω
• 1500W / Ch @ 4Ω
• 1800W / Ch @ 2.7Ω
• 1800W / Ch @ 2Ω
• 2700W / Ch @ 8Ω Bridged
• 3600W / Ch @ 4Ω Bridged
AMPLIFIER INPUTS
• 2 x Analogue Inputs
AMPLIFIER OUTPUT
• 2 Link Outputs
• 2 Power Outputs
CONNECTORS
• XLR Connectors for Signal Input and Link
Output
• Speak-on and Binding Post Connectors for
Channel Outputs
SYSTEM
SPECIFICATIONS
• Input CMRR > 60 dB
• Freq. resp.: 20Hz - 20kHz ±3dB
• THD : better than 0.03% (1 kHz)
• THD : better than 0.03% (FR)
• Nominal system gain: 36 dB
• Input Impedance — 20kΩ
• >500 Damping Factor, 1kHz, 8Ω
• Signal Limiters Present
• Protection Against Short Circuit /
Temperature / DC Outputs, Gorilla Limiters
Present
• X Series Pre-amps
• Mains In-rush Control present
CONTROLS &
MONITORING
• LED Strip for Output Metering
• Toggle Switches for Sensitivy Selection,
Input Mode Selection, LPF & Ground
• Rotary Knobs for Channel Volume
POWER CONSUMPTION
• 5.1A Power Consumption, Nominal @ 240V,
4 Ohms
• 10.1A Power Consumption, Nominal @
120V, 4 Ohms
• See Power Consumption & Thermal
Emission Chart for a detailed specification
OPERATING PARAMETERS
• Operating positions : To be used in a
rack-mount case with no front to back airflow
restriction
• Maximum permitted ambient temperature
(Ta max) 45° C (113° F)
• Minimum permitted ambient temperature
(Ta min): 0° C (32° F)
• 32 dB Fan Noise
AESTHETIC SPECIFICATIONS
• White Aluminum Chassis
• Matte Star Silver Front Pane
SIZE
• Product : 89 x 483 x 305 mm (H x W x D)
• Product : 3.5 x 19 x 12 inch (H x W x D)
• Packed individually
WEIGHT
• Net : 15.9 Kgs
• Net : 35.05
SHIPPING INFORMATION
• Carton Size
164 x 558 x 380 mm (H x W x D)
6.4 x 22 x 15 inch (H x W x D)
• Gross Weight : 16.7 Kgs / 36.8 Lbs
• Packed : Individually
DOWNLOADS CENTRE
Datasheet - 2XM
DWG Drawing - 2XM
PDF Drawing - 2XM
AC Current Draw Specifications
