Octa Go
2 X 6.5" Powered Shout Monitor
Product at a Glance
The British Acoustics Octa Go is a compact, powerful shout monitor designed for demanding live and touring environments. It features dual 6.5” low-frequency drivers and a 1.4” HF compression driver with neodymium magnets, delivering a punchy, articulate response with a 122 dB peak SPL. Powered by a 2-channel Class-D amplifier offering 500W AES continuous power and integrated 24-bit DSP, it provides precise crossover control, EQ tuning, and voicing flexibility. Suitable for pole mounting, subs, or floor wedge use, the Octa Go adapts effortlessly.
CRAFTSMANSHIP
Painstakingly Perfect Production
Over the years, craftsmanship has been closely linked with small scale individualistic production. Back in 1972, we started the same way. As we grew in scale & size, it was difficult to build each speaker individually, but quality control was of utmost importance as so switching to a general assembly line was simply not an option. So we wrote up a code, one quite like enigma, to ensure quality control. We selected the right partners, got the right tools, and in cases where those weren't available, we invented them. We grew slower than most as our aim was to last longer than most.
TECHNICAL SPECIFICATIONS
ACOUSTICAL
SPECIFICATIONS
• Freq. Response (-3 dB) : 65 Hz - 20 kHz
• Freq. Range (-10 dB) : 70 Hz - 20 kHz
• H Dispersion : 50° (- 6 dB)
• V Dispersion : 70° (- 6 dB)
• Crossover : 2.1 kHz Active
• Max output : Cont: 118 dB, 122dB Peak
SYSTEM SPECIFICATIONS
Recommended Subwoofers : See Systems
Chart for compatible subwoofers
LF TRANSDUCER
• 6.5" Low Frequency Driver
• 2 Drivers Connected in parallel
• 500W AES, 2000W Peak
• 2" Copper Voice Coil - Neodymium
Magnet
• Enhanced Airflow Path for minimal power
compression
HF TRANSDUCER
• 1.4" Exit HF Compression Driver
• 50W AES, 200W Peak
• 3.5" Voice Coil - Neodymium Magnet
• Extended Frequency range
AMPLIFIER & DSP
SPECIFICATIONS
• 2000W - Two Channel Class-D Amplifier
• M1 Power Factor Crossover Module
• Enhanced Amplifier efficiency
• 3-Stage System protection process
• 24-Bit Built-In DSP for Superior voicing
• On-Board 2 Channel mixer Bluetooth
• 2 x TRS Jack mic input, 1 x XLR line input,
1 x XLR line output & 1 x Bluetooth input
• IEC mains connector
HOUSING
• Birch wood Enclosure
• Granular Scratch Free Polyurea Paint
• Perforated Stainless Steel Grill backed by
acoustically transparent foam over a
stainless steel mesh
• Blue Decals on Grills for better Aesthetics
• British Acoustics Signature Brown Paint
• Rubber Feet for use as stage monitor
• M10 Flying Inserts
• 35mm Pole Socket
OPERATING
PARAMETERS
• Operating positions : To be used as a stage
monitor, or vertically deployed over a sub, or
on pole mount as an FOH Speaker
• Maximum permitted ambient temperature
(Ta max) 40° C (104° F)
• Minimum permitted ambient temperature
(Ta min): 4° C (39.2° F)
IP SPECIFICATIONS
• IP 43 - Standard protection against dust & splashes
AESTHETIC
SPECIFICATIONS
• British Acoustics Signature Umber Brown
Tone
• Non Reflective, Matte Black Grills
• Available in a RAL code of your choice (24
nos, minimum)
OPTIONAL ACCESSORIES
• See system chart for the System Accessories
SIZE
• Product : 320 x 150 x 250 mm (H x W x D)
• Product : 12.5 x 6 x 9.8 inch (H x W x D)
• Packed individually
WEIGHT
• Net : 5 Kgs
• Net : 11.02 Lbs
SHIPPING INFORMATION
• Carton Size
395 x 225 x 325 mm (H x W x D)
15.5 x 8.8 x 12.7 inch (H x W x D)
• Gross Weight : 6 Kgs / 13.2 Lbs
• Packed : Individually
DOWNLOADS CENTRE
Datasheet Octa Go
DWG Drawing Octa Go
PDF Drawing Octa Go
Gll
Software
