OctaLine 80 H
10" Powered, Two-Way Full Range Multi-Purpose Speaker
Product at a Glance
The OctaLine 80 H is a versatile 10" two-way powered speaker designed for multi-purpose professional audio applications requiring clarity, power, and portability. Delivering 2000W via a Class-H amplifier with integrated 24-bit DSP, it ensures optimized voicing, dynamic control, and distortion-free output at high SPL levels. The built-in 2-channel Bluetooth mixer provides seamless connectivity without external equipment, enhancing flexibility across live performance, monitoring, and installed sound environments. Constructed from durable birchwood with a scratch-resistant polyurea coating and a perforated stainless-steel grill, it offers reliable protection and clean acoustic projection, while M10 flying inserts and a 35mm pole socket support easy horizontal or vertical deployment..
CRAFTSMANSHIP
Painstakingly Perfect Production
Over the years, craftsmanship has been closely linked with small scale individualistic production. Back in 1972, we started the same way. As we grew in scale & size, it was difficult to build each speaker individually, but quality control was of utmost importance as so switching to a general assembly line was simply not an option. So we wrote up a code, one quite like enigma, to ensure quality control. We selected the right partners, got the right tools, and in cases where those weren't available, we invented them. We grew slower than most as our aim was to last longer than most.
TECHNICAL SPECIFICATIONS
ACOUSTICAL
SPECIFICATIONS
• Freq. Response (-3 dB) : 65 Hz - 20 kHz
• Freq. Range (-10 dB) : 55 Hz - 20 kHz
• H Dispersion : 90° (- 6 dB)
• V Dispersion : 50° (- 6 dB)
• Crossover : 2.1 kHz Active
• Max output : Cont: 120dB, 126dB Peak
SYSTEM SPECIFICATIONS
Recommended Subwoofers : See Systems
Chart for compatible subwoofers
LF TRANSDUCER
• 10" Low Frequency Driver
• 225W AES, 900W Peak
• 2” Alluminium Voice Coil - Ferrite Magnet
• Reinforced Surround ensuring improved
excursion control
• Vented pole piece for better heat
management and minimal power compression
HF TRANSDUCER
• 1” Exit HF Compression Driver
• 25W AES, 100W Peak
• 1” Voice Coil -Ferrite Magnet
AMPLIFIER & DSP
SPECIFICATIONS
• 2000W - Two Channel Class-H Amplifier
• M1 Power Factor Crossover Module
• Enhanced Amplifier efficiency
• 3-Stage System protection process
• 24-Bit Built-In DSP for Superior voicing
• On-Board 2 Channel Mixer with Bluetooth
• 2 x TRS Jack mic input, 1 x XLR line input,
1 x XLR line output & 1 x Bluetooth input
• IEC mains connector
HOUSING
• Birch wood Enclosure
• Granular Scratch Free Polyurea Paint
• Perforated Stainless Steel Grill backed by
acoustically transparent foam over a
stainless steel mesh
• Blue Decals on Grills for better Aesthetics
• British Acoustics Signature Brown Paint
• Rubber Feet for use as stage monitor
• M10 Flying Inserts
• 35mm Pole Socket
OPERATING
PARAMETERS
• Operating positions: Can be deployed
horizontally or vertically with the correct
installation brackets or can be used as a
monitor
• Maximum permitted ambient temperature
(Ta max) 40° C (104° F)
• Minimum permitted ambient temperature
(Ta min): 4° C (39.2° F)
IP SPECIFICATIONS
• IP 43 - Standard protection against dust & splashes
AESTHETIC
SPECIFICATIONS
• British Acoustics Signature Umber Brown
Tone
• Non Reflective, Matte Black Grills
• Available in a RAL code of your choice (24
nos, minimum)
OPTIONAL ACCESSORIES
• See system chart for the System Accessories
SIZE
• Product : 480 x 302 x 223 mm (H x W x D)
• Product : 19 x 12 x 8.7 inch (H x W x D)
• Packed individually
WEIGHT
• Net : 25.34 Kgs
• Net : 55.99 Lbs
SHIPPING INFORMATION
• Carton Size
555 x 377 x 298 mm (H x W x D)
21.8 x 14.8 x 11 inch (H x W x D)
• Gross Weight : 27.65 Kgs / 60.95 Lbs
• Packed : Individually
DOWNLOADS CENTRE
Datasheet OctaLine 80H
