VS 110 S
1 X 10" Wall Mount Subwoofer
Product at a Glance
The British Acoustics VS 110 S is a high-performance flush-mount subwoofer designed to deliver robust low-frequency reinforcement in compact, architecturally sensitive environments. Powered by a 10” long-excursion ferrite driver with 1000W peak output, it provides a frequency range of 36 Hz to 100 Hz with clarity and punch. Its Vero Design enhances magnetic flux, reduces moving mass, and ensures efficient SPL output with minimal turbulence. With 8Ω impedance, transformer taps for 100V/70V lines, and IP42-rated protection, the VS 110 S combines installation flexibility, durability, and discreet aesthetics—making it ideal for retail, hospitality, and lifestyle venues.
CRAFTSMANSHIP
Painstakingly Perfect Production
Over the years, craftsmanship has been closely linked with small scale individualistic production. Back in 1972, we started the same way. As we grew in scale & size, it was difficult to build each speaker individually, but quality control was of utmost importance as so switching to a general assembly line was simply not an option. So we wrote up a code, one quite like enigma, to ensure quality control. We selected the right partners, got the right tools, and in cases where those weren't available, we invented them. We grew slower than most as our aim was to last longer than most.
TECHNICAL SPECIFICATIONS
ACOUSTICAL SPECIFICATIONS
• Freq. Response (-3 dB) : 36 Hz - 10 kHz
• Freq. Range (-10 dB) : 25 Hz - 10 kHz
• Rated Power : 250W AES, 1000W Peak
• Omni Directional Coverage
• Cardioid Presets Available
• Crossover : 80-120Hz, Active
• Nominal Impedance : 8 Ω
• Max Output : 118 dB, 124 dB Peak
• 100V/70V Transformer Taps : 80W, 40W,
20W, 10W, 5W
SYSTEM SPECIFICATIONS
• Recommended System Control : Can be used
without DSP or with the PW-Six DSP for
voicing & tonal benefits
• Recommended Amplifiers : See Amplifier
load calculation chart
LF TRANSDUCER
• 10" Low Frequency Driver
• 250W AES, 1000W Peak
• 3" Voice Coil - Ferrite Magnet
• Vero Design allows for greater magnetic
flux, lower moving mass and optimised
volume compliance
• Slot Porting to reduce turbulence at
high SPL levels
HOUSING
• Impact Resistant ABS with UV Stabilisers
• Silver Body, Fricton painted
• White Rimless Grills
• Quickfit recess locking mechanism
• Fully Sealed Enclosure for better bass
response
• Quickfit recess locking mechanism
• Terra Locks for external mount
IP SPECIFICATIONS
• Standard Version : IP 42 - Offers basic
protection against dust & splashes
OPERATING PARAMETERS
• Operating Positions : Must be Flush
Mounted as per the manual into the ceiling
or used with the pendant accessory
• Maximum permitted ambient temperature
(Ta max) 55° C (124° F)
• Minimum permitted ambient temperature
(Ta min): -20° C (-4° F)
OPTIONAL ACCESSORIES
• See system chart for the System Accessories
SIZE
• Product: 179 x 540 x 540 mm (H x W x D)
• Product: 7.04 x 21 x 21 inch (H x W x D)
• Packed individually
WEIGHT
• Net : 20 kgs
• Net : 41 Lb
SHIPPING INFORMATION
• Carton SIze
254 x 615 x 615 mm (H x W x D)
10 x 24 x 24 inch (H x W x D)
• Gross Weight : 21 Kgs / 46 Lbs
• Packed : individually
DOWNLOADS CENTRE
Datasheet VS 110 S
DWG Drawing VS 110 S
PDF Drawing VS 110 S
