VS 106 T
1 x 6" High-Performance Speaker - 100V Wooden Cabinet
Product at a Glance
The British Acoustics VS-106 T is a 6" loudspeaker designed for distributed audio in commercial and hospitality spaces. With a 100V wooden cabinet and 120° x 80° dispersion, it ensures clear, even coverage ideal for conference rooms, retail zones, and restaurants. Its axial motor mid-high driver delivers articulate vocals and balanced musical detail. The enclosure is crafted from angular plywood with a water-based textured finish and protected by a perforated stainless steel grille. An impedance toggle enables 8Ω or 100V use, while M6 inserts, a 35mm pole socket, and VS Throne compatibility provide flexible installation options.
CRAFTSMANSHIP
Painstakingly Perfect Production
Over the years, craftsmanship has been closely linked with small scale individualistic production. Back in 1972, we started the same way. As we grew in scale & size, it was difficult to build each speaker individually, but quality control was of utmost importance as so switching to a general assembly line was simply not an option. So we wrote up a code, one quite like enigma, to ensure quality control. We selected the right partners, got the right tools, and in cases where those weren't available, we invented them. We grew slower than most as our aim was to last longer than most.
TECHNICAL SPECIFICATIONS
ACOUSTICAL SPECIFICATIONS
• Freq. Response (-3 dB) : 81 Hz - 20 kHz
• Freq. Range (-10 dB) : 60 Hz - 20 kHz
• Rated Power : 75W AES , 300W Peak
• H Dispersion : 120° (- 6 dB)
• V Dispersion : 80° (- 6 dB)
• Nominal Impedance : 8 Ω
• Max Output : 113 dB
• Fixed 20W Transformer Tap @ 100/70 V
• Impedance Toggle Switch to choose
between 8 Ω or 100V operation
SYSTEM SPECIFICATIONS
• Recommended Subwoofers : See Systems
chart for compitable subwoofer
• Recommended Amplifiers : See Amplifier
load calculation chart
• Recommended System Control : Can be used
without DSP or with the PW-Six DSP for
voicing & tonal benefits
LF TRANSDUCER
• 6" Mid-High Driver with Axial Motors
• 2 drivers connected in parallel
• 75W AES, 300W Peak
• 2" Voice Coil - Ferrite Magnet
• Special High Strength axial magnetic
motors for controlled movement
• Aerodynamically optimised ports
HF TRANSDUCER
• 1" HF Compression Driver
• 2 drivers connected in parallel
• 20W AES, 80W Peak
• 1” Voice Coil Ferrite Magnet
• Vero Waveguide, delivers a consistent
wide angled coverage
HOUSING
• Angular Plywood Enclosure
• Water based, textured paint
• Perforated Stainless Steel Grill
• British Acoustics Signature Brown Paint
• Available in any RAL colour of your choice
• M6 Inserts
• VS Throne, VS 26 Yoke
• 35mm Pole Socket
• No handles, fricton paint finish for easy `
lifting
OPERATING PARAMETERS
• Operating Positions : Must be Flush
Mounted as per the manual into the ceiling
or used with the pendant accessory
• Maximum permitted ambient temperature
(Ta max) 55° C (124° F)
• Minimum permitted ambient temperature
(Ta min): -20° C (-4° F)
IP SPECIFICATIONS
• Standard Version : IP 42 - Offers basic
protection against dust & splashes
OPTIONAL ACCESSORIES
• See system chart for the System Accessories
SIZE
• Product : 203.2 x 157 x 101 mm (H x Wx D)
• Product: 8 x 6.2 x 4 inch (H x Wx D)
• Packed individually
WEIGHT
• Net : 4.2 Kgs
• Net : 9.0652 Lbs
SHIPPING INFORMATION
• Carton Size
278 x 232 x 176 mm (H x W x D)
10.9 x 9 x 6.9 inch (H x W x D)
• Gross Weight : 4.41 Kgs / 9.74 Lbs
• Packed : Individually
DOWNLOADS CENTRE
Datasheet VS 106 T
DWG Drawing VS 106 T
PDF Drawing VS 106 T
Gll
Software
