VF-186 XTC
6" High-Performance Rimless Ceiling Speaker
Product at a Glance
The British Acoustics VF-186 XTC is a 6" rimless ceiling speaker engineered for precise mid-high frequency performance in architectural audio systems. It pairs a V6L-25 Vero driver (1" voice coil) with a V6H-25 HF transducer, delivering 150W AES and 500W peak power with 120° conical dispersion for wide, even coverage. A slot-ported, fully sealed enclosure reduces turbulence at high SPL for clean, controlled sound. Its impact-resistant ABS housing with UV stabilisers is available in silver and white, and a quick-fit recess locking mechanism makes installation fast and secure. Supporting 100V/70V transformer taps and optional pendant mounting, the VF-186 XTC adapts easily to varied ceiling configurations.
CRAFTSMANSHIP
Painstakingly Perfect Production
Over the years, craftsmanship has been closely linked with small scale individualistic production. Back in 1972, we started the same way. As we grew in scale & size, it was difficult to build each speaker individually, but quality control was of utmost importance as so switching to a general assembly line was simply not an option. So we wrote up a code, one quite like enigma, to ensure quality control. We selected the right partners, got the right tools, and in cases where those weren't available, we invented them. We grew slower than most as our aim was to last longer than most.
TECHNICAL SPECIFICATIONS
ACOUSTICAL SPECIFICATIONS
• Freq. Response (-3 dB) : 80 Hz - 20 kHz
• Freq. Range (-10 dB) : 59 Hz - 20 kHz
• Rated Power : 150W AES, 500W Peak
• Dispersion : 120° conical
• Crossover : 1.9 kHz Passive
• Nominal Impedance : 8 Ω
• Max Output : 113 dB
• 100V/70V Transformer Taps : 80W, 40W,
20W, 10W, 5W
SYSTEM SPECIFICATIONS
• Recommended System Control : Can be used
without DSP or with the PW-Six DSP for
voicing & tonal benefits
• Recommended Subwoofers : See Systems
chart for compatible subwoofer
• Recommended Amplifiers : See Amplifier
load calculation chart
CO-AXIAL TRANSDUCER
• LF : V6L-25 Vero Drivers
• 125W AES, 500W Peak
• 1" Voice Coil - Ferrite Magnet
• 6" Mid-High Frequency
• Vero Design Material Science for
unique & optimised cone material
• Large Slotted Ports for better performance
in the lower frequency range
• HF : V6H-25 Vero HF Transducers, 1" Exit
• 15W AES, 60W Peak
• 0.75" Voice Coil - Ferrite Magnet
HOUSING
• Impact Resistant ABS with UV Stabilisers
• Silver Body, Friction painted
• White & Black Rimless Grills available
• Quickfit recess locking mechanism
• Fully Sealed Enclosure for better bass
response
• Terra Locks for external mounts
OPERATING PARAMETERS
• Operating Positions : Must be Flush
Mounted as per the manual into the ceiling
or used with the pendant accessory
• Maximum permitted ambient temperature
(Ta max) 55° C (131° F)
• Minimum permitted ambient temperature
(Ta min): -20° C (-4° F)
IP SPECIFICATIONS
• Standard Version : IP 42 - Offers basic
protection against dust & splashes
OPTIONAL ACCESSORIES
• See system chart for the System Accessories
SIZE
• Product : 127 x 152.4 x 152.4 mm (H x W x D)
• Product : 5 x 6 x 6 inch (H x W x D)
• Packed individually
WEIGHT
• Net : 2.9 Kgs
• Net : 6.4 Lbs
SHIPPING INFORMATION
• Carton Size
202 x 227 x 227 mm (H x W x D)
8 x 8.93 x 8.93 inch (H x W x D)
• Gross Weight : 3.045 Kgs / 6.714 Lbs
• Packed : individually
DOWNLOADS CENTRE
Datasheet VF 186 XTC
DWG Drawing VF-186 XTC
PDF Drawing VF-106 XTC
