Octa 88 XH
8" Co-axial Powered Multipurpose Monitor Speaker
Product at a Glance
The Octa 88XH is an 8" coaxial powered monitor speaker designed to deliver precise and balanced audio performance for professional applications. With its optimized frequency response and coaxial design, it ensures accurate sound reproduction with minimal phase distortion, making it perfect for stage monitoring, small venue installations, and portable setups. Its wide dispersion pattern ensures consistent sound coverage, providing clear and immersive audio experiences across various environments.
CRAFTSMANSHIP
Painstakingly Perfect Production
Over the years, craftsmanship has been closely linked with small scale individualistic production. Back in 1972, we started the same way. As we grew in scale & size, it was difficult to build each speaker individually, but quality control was of utmost importance as so switching to a general assembly line was simply not an option. So we wrote up a code, one quite like enigma, to ensure quality control. We selected the right partners, got the right tools, and in cases where those weren't available, we invented them. We grew slower than most as our aim was to last longer than most.
TECHNICAL SPECIFICATIONS
ACOUSTIC
ACOUSTICAL SPECIFICATIONS
• Freq. Response (-3 dB) : 58 Hz - 22 kHz
• Freq. Range (-10 dB) : 53 Hz - 22 kHz
• H Dispersion : 100° (- 6 dB)
• V Dispersion : 100° (- 6 dB)
• Crossover : 2 kHz Active
• Max Output : 118dB, 124dB Peak
SYSTEM SPECIFICATIONS
• Recommended Subwoofers : Octa 88 S, Octa 85 DS, OctaLine 84FS, OctaLine 88S
CO-AXIAL TRANSDUCER
• ARA-CX-08-35- 8" Coaxial Driver with 0.8" Compression Driver
• 200W Continuous, 800W Peak
• LF : 2" Voice Coil - Ferrite Magnet
• AuraTense Suspension for an optimised compliant restoring force
• Engineered Demodulation Circuit to minimize magnetic flux and lower distortion
• HF : 1.4" Voice Coil - Ferrite
• 25W AES, 100W Peak
• Mounted behind the asymmetrical aura waveguide that ensures minimal resonance across a precise coverage pattern
AMPLIFIER & DSP SPECIFICATIONS
• 2000W - Two Channel Class-H Amplifier
• M1 Power Factor Crossover Module
• Enhanced Amplifier efficiency
• 3-Stage System protection process
• 24-Bit Built-In DSP for Superior voicing
• On-Board 2 Channel mixer Bluetooth
• 2 x TRS Jack mic input, 1 x XLR line input, 1 x XLR line output & 1 x Bluetooth input
• IEC mains connector
HOUSING
• Birch wood Enclosure
• Granular Scratch Free Polyurea Paint
• Perforated Stainless Steel Grill backed by acoustically transparent foam over a stainless steel mesh
• Blue Decals on Grills for better Aesthetics
• British Acoustics Signature Brown Paint
• Rubber Feet for use as stage monitor
• M10 Flying Inserts
• 35mm Pole Socket
• Sloped Input Plates for better cable management & ingress protection
• Blue Decals on Grills for better Aesthetics
• British Acoustics Signature Brown Paint
• Available in any RAL colour of your choice.
AESTHETIC
SPECIFICATIONS
• IP 43 - Standard protection against dust &
splashes
AESTHETIC SPECIFICATIONS
• British Acoustics Signature Umber Brown Tone
• Non Reflective, Matte Black Grills
• Available in a RAL code of your choice (24 nos, minimum)
OPERATING PARAMETERS
• Operating positions: Flowing or Ground stacked with the correct Array Frame or Accessory
• Maximum permitted ambient temperature (Ta max) 40° C (104° F)
• Minimum permitted ambient temperature (Ta min): 4° C (39.2° F)
SIZE
• Product: 258 x 428 x 254 mm (H x W x D)
• Product: 10.5 x 17.5 x 11 inch (H x W x D)
• Packed individually
WEIGHT
• Net Kgs : 16.2
• Net Lbs : 35.7
DIMENSIONS
